|Model Number||JYCH 50|
|Loading capacity of yarn||50 to 55 Kg|
|Vaccum pump||5 hp|
|Main vessel length||1300 mm|
|Main vessel diameter||920 mm|
|Fabric type||Cotton waxed, cotton unwaxed, viscose, wool, nylon, polyester|
|Compressed air required||6-7 kg/ cm3|
Jogson Yarn Conditioning Machine, (also known as Heat Setting Machine) is suitable for elasticity & strength of yarn to remove snarling & curling effects, Twist Setting, Stabilizing moisture level in dry yarn, Stabilizing the yarn hence better efficiency in Bulking of Acrylic yarn, Dye Fixing, Dyeing, Winding, Weaving etc. The Dual Purpose Machine – Conditioning of Natural Fibers, HTHP heat transfer machine, Viscose, Lycra Blends, Wool & Heat Setting of Polyester, Nylon, Acrylic Yarn etc in Cone and Hank form.
|Automation Grade||Fully Automatic|
|Maximum Design Temperature||130 degree C|
|Average Steam Consumption||0.25-0.50 Kg at 7 kg./cm2 (per kg. of yarn)|
|Water Consumption||At 1 bar 15 30 Ltrs/min (During the vacuum pump operation)|
|Compressed Air Requirement||6-7 kg./cm2|
The entire process of conditioning starts from material loading, Locking of front door then Vacuum is first created up to 740 mm HG by the water ring vacuum pump to remove the air & impurities from the yarn. This improves penetration by steam & lack of O2 will prevent oxidation. Steam is then injected into the Machine along its entire length ensuring an even distribution of temperature. Vacuum is recreated to remove excess moisture from the yarn.
External Steam Heating of the Machine through Limpet Coil ensures no steam condensation which also helps to maintain the temperature. When Cooling is required for the machine, same Limpet Coil can work with water. Multiple Vacuum, Steam & water cooling cycles are possible by linking two or more programs in the Micro-Processor TPR-23.
Rated by 4 Users